How a Strong NdFeB Magnet Is Specified for a Small Assembly

2026-11-16


How a Strong NdFeB Magnet Is Specified for a Small Assembly

The Strong NdFeB magnet on this page is item number 1089 from NIBBOH. The page gives the number, the grade as N35, the size as a=0.157in, b=0.472in and h=0.079in, the magnetization as through 0.079in, the maximum working temperature as 80 degrees Celsius, the material as NdFeB and the weight as 0.7g. It also shows a retail price of 0.88 US dollars. The page does not give the coating, the pull force, the tolerance or the packing for this item, so a buyer should ask for the data sheet and a sample.

The 1089 Magnet

The page gives a small block size in inches: 0.157 by 0.472 by 0.079. A buyer should convert the size to millimetres and check the tolerance for the assembly. The page does not give a plating or a coating, such as nickel, zinc, epoxy or a rubber coat. The buyer should ask for the coating and the salt spray test. The page does not give the pull force or the holding force. The buyer should ask for a pull test on the target steel and the target thickness.

The page gives a magnetization direction of through 0.079in, which is the thin direction. A buyer should confirm the pole orientation on the drawing. The page does not give a multipole or a custom magnetization option. The buyer should ask whether a different direction is available. The page does not give a maximum operating temperature cycle. The buyer should ask for the irreversible loss data above the working temperature. The page does not give a fragility note, and a small NdFeB block can chip, so the handling and the packing should be confirmed.

Size and Grade

The page gives an N35 grade. It does not give the maximum energy product, the coercivity or the intrinsic coercivity. A buyer should ask for the grade data and the demagnetization curve. The page does not give a tolerance class for the three dimensions. The buyer should ask for the dimensional report. The page does not give a minimum order or a price break. The buyer should confirm the price for the order quantity, because the page shows a retail price only.

The page does not give a surface condition or a chip limit. A buyer should ask for the visual standard and the chip rule for a small magnet. The page does not give a weight tolerance. The buyer should ask for the unit weight and the packing count. The page does not give a magnetic strength test method. The buyer should ask for the gauss meter method and the acceptance value. Those points should be in the specification before the order.

Temperature and Coating

The page gives a maximum working temperature of 80 degrees Celsius. A buyer should confirm the safety margin for the application, because an N35 grade at 80 degrees Celsius is at the limit. The page does not give a low temperature limit. The buyer should ask for the cold storage and the thermal shock data. The page does not give a coating thickness or a corrosion test. The buyer should ask for the salt spray and the humidity test, especially for a magnet used outdoors or in a wet area.

The page does not give a handling or a safety warning. A buyer should ask for the magnet safety sheet, because a small strong magnet can be a hazard near a pacemaker, a credit card or a child. The page does not give a packaging method. The buyer should ask for a separated pack, a foam or a plastic case. The page does not give an air freight rule for a magnet. The buyer should confirm the shipping declaration and the packing before the order.

Ordering and Contact

The page does not give a minimum order, a lead time or a payment term. A buyer should send the size, the grade, the coating, the magnetization, the quantity and the destination, and ask for a quotation with the data sheet and a sample. The page does not give a custom size service for this item, although the site lists customizable magnets. The buyer should ask for the tooling and the sample time for a custom shape. The page does not give a warranty term, so it should be agreed in the order.

The contact on the page is usa@nibboh.com and +1 516 855 0112. The site covers permanent magnets, NdFeB, ferrite, customizable magnets, magnetic components and a wide range of magnetic tools and hooks. The page does not give a factory address or a certificate list. For a first order, a sample of the Strong NdFeB magnet no. 1089 and a pull test on the real steel are the practical way to check the strength, the size and the coating before a volume order.

Related News

Understanding Neodymium Magnets: A Comprehensive Guide for Electrical Professionals

Neodymium magnets, composed primarily of neodymium, iron, and boron, are part of the rare-earth magnet family and are known for their impressive magnetic strength and versatility. These magnets exhibit a significantly higher magnetic energy product than traditional magnets, making them essential in various electrical applications. This article delves into the characteristics, applications, and con

2026-11-22

Top Features to Look for in a Magnetic Pick-Up Tool: Your Ultimate Guide

Top Features to Look for in a Magnetic Pick-Up Tool: Your Ultimate Guide Magnetic pick-up tools are essential for anyone who frequently works with metal objects, whether in a professional capacity or for personal projects. These tools provide a convenient solution for retrieving small ferrous items like screws, nuts, and washers from hard-to-reach places. This article delves into the **top feature

2026-11-21

Exploring the Versatility and Applications of Pot Magnets with Hooks

Pot magnets with hooks are increasingly popular due to their unique design and practical applications in various fields, particularly in the electrical and magnetic materials industry. These magnets consist of a permanent magnet encased in a steel pot, which enhances their magnetic strength and focus. The addition of a hook transforms these magnets into versatile tools that can be employed in nume

2026-11-20